網站導覽  
美國WPI產品
 
放大器與靜電計
 
刺激器與隔離器
 
動物生理學
 
生物傳感器
 
細胞與組織研究
 
數據採集系統
 
手術與顯微解剖工具
 
氣體麻醉機、電刀、燒灼儀
 
玻璃毛細管
 
顯微操作儀
 
顯微鏡與攝影器材
 
微鍛儀與拉針器
 
幫浦與顯微注射器材
 
實驗室耗材
 
 

Continuous Cycle Syringe pump
 SP210c  Continuous Cycle Syringe pump
 
  • Accepts syringe sizes: 10uL - 60mL
  • Minimum Flow Rate: 0.001 uL/hr
  • Maximum Flow Rate: 86 mL/hr (60 mL syringe)
  • 95-135 V, 50 Hz 


  • Sturdy, reliable, and easy to use

    Sturdy and reliable, extremely simple to set up and use - and surprisingly affordable. Liquid crystal displays (LCDs) prompt you through set­up: First, select syringe from table stored in the pump\'s memory and displayed on the LCD. Next, enter the volume to be dispensed. Finally, enter the flow rate, press \"start.\" It\'s fast and simple. Your settings are permanently stored in memory - there\'s no need to re-enter them each day. SP pumps feature preset rate and volume control. Just set the volume you want dispensed. Volume is tracked continuously on the LCD display. Then, when the preset volume has been dispensed, the pump shuts off automatically. The easy-to-read digital display provides realtime readings using both parameters and values for clearer, mistake-free readings. The SP200 Series pumps offer TTL and RS-232C interfaces and automatic shutoff under stall conditions.

    Features

    The SP210c can hold up to four syringes and can cycle continuously back and forth in a push-pull action. As two syringes are infusing, two other syringes are withdrawing at the same rate. At the end of the set volume the direction is automatically reversed and the next cycle begins. With the use of 2-way valves, the pump can empty and refill syringes for a continuous dispense. Holds four syringes, 10 mL to 60 mL each. With larger syringes the full volume may not be usable. [With a 60 mL syring, 40 mL is usable; with a 30 mL syringe, the full volume is usable.

    Mode Infusion/Withdrawal (continuous)
    Syringe Size 10 µL-60 mL (four)
    Maximum Flow Rate 86 mL/min (60 mL syringe)
    Minimum Flow Rate 0.001µL/hr
    Linear Force 40 Ib (18 kg)
    Advance Per Microstep 0.165 micron
    Maximum Step Rate 1600 steps/sec
    Minimum Step Rate 1 step/100 sec
    Accuracy < 1% error
    Reproducibility ± 0.1%
    Dimensions 11 x 9 x 5.5 in., 28 x 23 x 14 cm
    Shipping Weight 12 Ib (5.4 kg)
    Notes: Available 95-135 V or 220-240 V, 50/60 Hz

     
     
     
    關於太和實驗動物實驗儀器設備飼育管理儀器手術解剖器具美國WPI產品聯絡我們首頁