|
|
|
| |
- Manual coarse controls
- Sophisticated controller allows control of all three axes
- Includes controller
|
|
|
|
Features
Manual coarse controls use cross roller bearing slides. Vernier scales allow readings to 0.1 mm. All controls are closely grouped so adjustments can be made in any plane with minimum effort. The DC3001 features DC motor drives and fine control micrometers in all three axes. Left- or right-handed versions of the DC3001 are supplied with a standard 12 mm clamp. Standard accessories provided include one microelectrode holder and a securing bolt and wrench.
Controller
The sophisticated SYS-MS314 Controller allows control of all three axes. Movements may be continuous through the use of cross switches, or the controller can cause the DC3001 to step in defined increments. Steps as small as 0.5 µ are possible. Available separately, a popular joystick controller, STM3, allows control of the X, Y and Z axes.
| Manual: Travel Range: X-axis |
37 mm |
| Manual: Travel Range: Y-axis |
20 mm |
| Manual: Travel Range: Z-axis |
20 mm |
| Manual: Resolution: X-axis |
0.1 mm |
| Manual: Resolution: Y-axis |
0.1 mm |
| Manual: Resolution: Z-axis |
0.1 mm |
| Motorized: Travel Range: X-axis |
10 mm |
| Motorized: Travel Range: Y-axis |
10 mm |
| Motorized: Travel Range: Z-axis |
10 mm |
| Motorized: Resolution: X-axis |
0.5 µm |
| Motorized: Resolution: Y-axis |
0.5 µm |
| Motorized: Resolution: Z-axis |
0.5 µm |
| Motorized: Maximum Speed: X-axis |
0.2 mm/sec |
| Motorized: Maximum Speed: Y-axis |
0.2 mm/sec |
| Motorized: Maximum Speed: Z-axis |
0.2 mm/sec |
| Shipping Weight: DC3001: |
3 lbs (1.4 kg) |
| Shipping Weight: MS314: |
1.8 lbs (0.9 kg) |
| Shipping Weight: STM3: |
2.8 lbs (1.3 kg) |
|
